Safe Water For Better Health

Home ›› Domestic RO ›› Open Flow with Tank

Open Flow with Tank

System Application: Domestic RO Water Treatment System can be used in Home, Shop and Office etc.

Product Feauters
  • 75 GPD High Pressure pump of Aquaa Care
  • N.F.S. Approved, leak proof connectors, fittings and tubes
  • N.F.S. Approved, Non-Toxic Filter Housing made up of food grade polymers
  • Fully automatic system with auto ON/OFF facility.
  • High purifying capacity of Aquaa Care Membrane which produces 12 liter water per hour. Purifies impure water to sweet pure drinking water. Removes bacteria and virus
  • Availability of water as per requirement, even in absence of electricity.
  • Low cost of maintenance and consumables.

Different stages of treating water:


(Stage 1) 5Micron Sediment Filter:
With five micron rating, it is effective in removing dirt, rust and sand particles.


(Stage 2) 5 Micron  Inline Sediment Filter :
With five micron rating, it is effective in removing dirt, rust and sand particles.


(Stage 3) Granular Activated Pre Inline Carbon Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.


(Stage 4) Reverse Osmosis Membrane:
A thin film composite high quality Aquaa Care membrane processes 75 gallons water per day. It removes the hard water contaminants that may be present in water, like - lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite and selenium. It also removes Bacteria and Virus from water.


(Stage 5) Post Carbon Inline Filter:
It removes objectionable tastes and odors to enhance the quality of drinking water.

Specification – 10 LPH RO Plant:
Purification Capacity 12 liters/hour
Max.Duty Cycle 75 liters/ day
Storage Tank Capacity 8 Liters
Filter Cartridges Sediment, Activated Carbon, UF, Post Carbon
RO  Membrane 1812-75 GPD Aquaa Care
Booster Pump 75 GPD Aquaa Care
Min.Inlet Water Pressure 0.25 Kg/cm2
Input Voltage 160-300V AC (50Hz)
Operating Voltage 24V DC/36 VDC

Specification – 25 LPH RO Plant:
 Description  Commercial - 50 LPH RO
 Flow Rate  25 LPH
 Max. Duty Cycle  200 LDP
 Filter Cartridge  Sediment, Activated Carbon and Post Carbon
 Power Consumption  40-60 Watt
 Min. Feed Water Pressure  1.5 Kg/cm2
 Dimensions L x W x H  67cm x 25cm x 73cm
 Separate Storage Tank  Optional
 RO Membrane  75 GPD (5 Nos), Aquaa Care Membrane
 Booster Pump  75 GPD (2 Nos), Aquaa Care Pump
 Max. Feed Water TDS (Total Dissolved Solids)  1500 ppm
 Max. Feed Water Hardness  400 ppm
 Input voltage  160-300V AC (50Hz)

Authorised Distributor

CSM Woongjin chemical