DOMESTIC RO WATER TREATMENT PLANT
System Application:
Domestic RO Water Treatment System can be used in Home, Shop and Office etc.
Product Features:
- 250 GPD High Pressure pump of Aquaa Care
- N.F.S. Approved, leak proof connectors, fittings and tubes
- N.F.S. Approved, Non-Toxic Filter Housing made up of food grade polymers
- Fully automatic system with auto ON/OFF facility.
- High purifying capacity of Aquaa Care Membrane which produces 12 liter water per hour. Purifies impure water to sweet pure drinking water. Removes bacteria and virus
- Availability of water as per requirement, even in absence of electricity.
- Low cost of maintenance and consumables.
Different stages of treating water:
(Stage 1) 5-Micron Sediment Filter:
With five micron rating, it is effective in removing dirt, rust and sand particles.
(Stage 2) 5-Micron Inline Sediment Filter:
With five micron rating, it is effective in removing dirt, rust and sand particles.
(Stage 3) Granular Activated Pre Inline Carbon Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite high quality Aquaa Care membrane processes 75 gallons water per day. It removes the hard water contaminants that may be present in water, like - lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite and selenium. It also removes Bacteria and Virus from water.
(Stage 5) Post Carbon Inline Filter:
It removes objectionable tastes and odors to enhance the quality of drinking water.
Specification:
TECHNICAL SPECIFICATION | |
Description | Commercial - 50 LPH RO |
---|---|
Flow Rate | 50 LPH |
Max. Duty Cycle | 400 LDP |
Filter Cartridge | Sediment, Activated Carbon and Post Carbon |
Power Consumption | 80-100 Watt |
Min. Feed Water Pressure | 1.5 Kg/cm2 |
Dimensions L x W x H | 45cm x 25cm x 85cm |
Separate Storage Tank | Optional |
RO Membrane | 75 GPD (5 Nos), Aquaa Care Membrane |
Booster Pump | 250 GPD (2 No) |
Max. Feed Water TDS (Total Dissolved Solids) | 1500 ppm |
Max. Feed Water Hardness | 400 ppm |
Input voltage | 160-300V AC (50Hz) |